Toro Reelmaster 7000-D, Инструкция по установке

Страница: 2 / 2

Note:
Ensure that the rubber grommets remain in
place.
CAUTION
The sharp edges of the mesh guard could cut
you or someone else.
Keep the cable ties in place on the guard
frames until the guards are secured with the
nuts and bolts.
Figure 2
1. Flange nut 4. Cable tie (2)
2. Bolt 5. Shoulder bolt
3. Guard assembly
5. Secure the bottom front corner of the glass and the
guard with the shoulder bolt and a flange nut (
Figure 2 ).
6. Secure the other 2 corners with 2 flange nuts and 2
bolts (
Figure 2 ).
7. Cut and discard the cable ties ( Figure 2 ).
8. Repeat this procedure for the other side of the cab.
2