Toro REELMASTER 6700 D, Руководство оператора

Страница: 36 / 56

g019453
Figure 48
1. Hood latch
3. Remove the dipstick ( Figure 49 ), wipe it clean,
install the dipstick into the tube, and pull it out
again.
Check the oil level on the dipstick; the oil level
should be up to the Full mark on the dipstick.
g019454
Figure 49
1. Dipstick
4. If the oil is below the safe range, remove the
fill cap (
Figure 50 ) and add oil until the level
reaches the Full mark.
Important:
Do not overfill the engine.
g019455
Figure 50
1. Fill cap
5. Install the oil fill cap and dipstick.
6. Close the hood and secure it with the latches.
Servicing the Engine Oil
and Filter
Service Interval: After the first 50 hours
Every 150 hours
Capacity: 7.0 L (7.5 US qt) with filter
Change the oil and filter initially after the first 50 hours
of operation, thereafter change oil and filter every 150
hours.
1. Remove the drain plug ( Figure 51 ) and let oil
flow into a drain pan. When the oil stops, install
the drain plug.
g019470
Figure 51
1. Drain plugs
2. Remove the oil filter ( Figure 52 ). Apply a light
coat of clean oil to the new filter seal before
screwing it on. Do not overtighten the filter.
36