Toro Reelmaster 5610-D, Руководство пользователя

Страница: 42 / 84

Allowing a Reset Regeneration
The InfoCenter displays the high exhaust-temperature icon
when the reset regeneration is in process.
Note:
If I
NHIBIT
R
EGEN
is set to O
N
, the InfoCenter
displays A
DVISORY
#185 ( Figure 72 ). Press button 3 to set
inhibit regeneration setting to O
FF
and continue with the
reset regeneration.
g224394
Figure 72
Note:
If the engine exhaust temperature is too low, the
InfoCenter displays A
DVISORY
#186 ( Figure 73 ) to inform
you to set the engine to full throttle (high idle).
g224395
Figure 73
Note:
When the reset regeneration completes, the
high exhaust-temperature disappears from the
InfoCenter screen.
Parked or Recovery Regeneration
•
When the engine computer requests either a
parked regeneration or a recovery regeneration, the
regeneration request icon (
Figure 74 ) displays in the
InfoCenter.
g224404
Figure 74
•
The machine does not automatically perform a parked
regeneration or a recovery regeneration, you must run
the regeneration through the InfoCenter.
Parked Regeneration Messages
When a parked regeneration is requested by the engine
computer the following messages display in the InfoCenter:
•
Engine warning SPN 3720, FMI 16 ( Figure 75 )
g213863
Figure 75
•
Parked regeneration required A
DVISORY
#188 ( Figure
76 )
Note:
Advisory #188 displays every 15 minutes.
g224397
Figure 76
•
If you do not perform a parked regeneration within 2
hours, the InfoCenter displays parked regeneration
required—power takeoff disabled A
DVISORY
#189
( Figure 77 ).
42