Toro reelmaster 5300-d, Руководство оператора

Страница: 37 / 40

CHANGING REAR AXLE LUBRICANT
(Model 03531 only)
After every 800 hours of operation the oil in the rear
axle must be changed.
1. Position the machine on a level surface.
2. Clean area around the (3) drain plugs, (1) on
each end and (1) in the center.
3. Remove plugs allowing the oil to drain into
drain pans.
4. After the oil is drained, apply thread locking
compound on drain plug threads and reinstall in
the axle.
5. Fill the axle with lubricant.
REAR WHEEL TOE-IN
After every 800 operating hours or annually, check
the rear wheel toe-in.
1. Measure center-to-center distance (at axle
height) at the front and rear of the steering tires.
The front measurement must be 3 mm less than
the rear measurement.
2. To adjust, loosen the clamps at both ends of the
tie rod.
3. Rotate the tie rod(s) to more the front of the tire
inward or outward.
4. Tighten the tie rod clamps when the adjustment
is correct.
37
Maintenance
Figure 51
1. Drain Plugs (3)
➀
Figure 53
1. Tie Rod(s)
➀
Figure 52
1. Transmission Suction Line
2. Transmission Oil Filter
➀
➁