Toro Reelmaster 450-D, Руководство по обслуживанию

Страница: 14 / 306

Rev. A
Reelmaster 450–D
Page 2 – 6
Product Records and Manuals
REELMASTER 450–D and 4500–D Maintenance Schedule
Minimum Recommended Maintenance Intervals
Lubricate Reel Control Valve Grease Fitting
Lubricate Reel Speed Control Valve with Oil
Lubricate all Grease Fittings
Check Battery Condition and Connections
}
Change Engine Oil and Filter
Drain Water from Hydraulic Tank
{
Check Fan and Alternator Belt
Inspect Cooling System Hoses
Service Air Cleaner Filter Element
Inspect Cutting Unit Reel Drive Belts
{
Torque Wheel Lug Nuts
Replace Fuel Filter
Inspect Fuel Lines and Connections
}
Torque Cylinder Head and Adjust Valves
}
Check Engine RPM (idle and full throttle)
Drain and Clean Fuel Tank
}
Replace Hydraulic Oil Filter
Replace Hydraulic Tank Breather
}
Change Front Planetary Gear Lube
Pack Rear Axle Bearings (2wd)
Check Rear Wheel Toe–In
{
Initial break in at 10 hours
}
Initial break in at 50 hours
Replace all Moving Hoses
Replace Safety Switches
Cooling System – Flush / Replace Fluid
Change Hydraulic Oil
Every
50hrs
Every
100hrs
Every
200hrs
Every
800hrs
Annual Recommendations:
Items listed are recommended every 1500
hours or 2 years, whichever occurs first.
Every
400hrs
A Level
Service
B Level
Service
C Level
Service
D Level
Service
E Level
Service