Toro Reelmaster 3555, Руководство оператора, Страница: 54 / 76

Cleaning the Brake Drum and
Shoes
At both sides of the machine, clean inside the brake
drums, the brake shoes, backing plate (
Figure 78 ),
and when installed, clean the optional grass shield of
any grass, dirt, and dust.
g332543
Figure 78
Inspecting and Lubricating the
Brake Cam Shaft
1. At the inboard side of the brake-backing plate
(machines without the optional wheel-rim grass
shield) or the wheel shield (machines with
the optional wheel-rim grass shield), spray
penetrating oil between the brake cam shaft and
the backing plate (
Figure 79 or Figure 80 ).
g332544
Figure 79
Machines without the Optional Grass Shield
1. Backing plate 2. Brake cam shaft
g332545
Figure 80
Machines with the Optional Grass Shield
1. Backing plate 2. Brake cam shaft
2. Move the parking brake lever up and down to
check that the lever for the brake-cam lever
moves freely (
Figure 81 ).
Note:
If the brake cam binds, repair or replace
the brake cam; refer to the Service Manual for
your machine.
g332560
Figure 81
1. Brake-cam lever
54