Toro Recycler 22191, Руководство оператора

Страница: 15 / 32

Adjusting the cutting height levers could bring
your hands into contact with a moving blade
and result in serious injury.
• Stop the engine and wait for all movement
to stop before adjusting the cutting height.
• Do not put your fingers under the housing
when adjusting the cutting height.
1. Pull the wheel height adjustment lever toward the
wheel (Figure 19) and move it to the desired setting.
Figure 19
1. Wheel height adjustment lever
2. Release the wheel height adjustment lever and seat
it securely in the notch.
3. Adjust all the wheels to the same cutting height
setting.
Using the Grass Bag
Occasionally, you may wish to use the grass bag for
bagging extra long grass, lush grass, or leaves.
Installing the Grass Bag
1. Stop the engine and wait for all moving parts to
stop.
2. Ensure that the discharge door handle is fully
forward and that the pin is engaged in the catch
(Figure 20).
Figure 20
1. Bag frame on retaining
post 3. Handle fully forward;
discharge door closed
2. Pin engaged in catch
3. Slide the hole in the bag frame onto the retaining
post on the discharge tunnel (Figure 20).
4. Set the rear of the bag frame onto the bag support
rod.
5. Pull the discharge door handle forward until the pin
clears the catch, and move the handle rearward until
the pin locks in the bag notch (Figure 21).
Figure 21
1. Pin locked in bag notch
Note:
The discharge door in the lawn mower
housing is now open.
15