manualshive.com logo in svg

Toro Recycler 22170, Руководство оператора

Поделиться
Скачать
Toro Recycler 22170 Скачать руководство пользователя страница 13

13

Service Item

200

Hours

100

Hours

50

Hours

25

Hours

5

Hours

After

every

use

Service Operation

Belt Cover

Remove and clean grass,
clippings and debris from under
cover.

X

Engine Oil

Change engine oil after first 8
hours of operation. Thereafter,
change engine oil every 50
hours (without oil filter) and
every 100 hours (with oil filter).

X

X

Paper Air Filter

Clean every 100 hours.
Replace every season or 300
hours. Replace it more
frequently under dusty
conditions.

X

Spark Plug

Inspect and clean. Replace if
necessary.

X

Cooling System

Clean grass, clippings, debris
or dirt that may clog engine air
cooling fins and starter. Clean
more frequently if operated
under dirty or high chaff
conditions.

X

Oil Filter

Change oil filter every 200
hours.

X

CAUTION

POTENTIAL HAZARD

•

If you leave the wire on the spark plug, someone could start the engine.

WHAT CAN HAPPEN

•

Accidental starting of engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

•

Pull the wire off of the spark plug before you do any maintenance. Also push wire aside so it
does not accidentally contact spark plug.

Air Filter

Clean the foam pre-cleaner every 25 hours of operation.
Clean the  paper air filter every 100 hours of operation.
Replace the paper air filter once every season or every
300 hours of operation; replace it more frequently under
dusty conditions.

IMPORTANT: Do not operate the engine without the
air filter assembly; extreme engine damage will occur.

1. Stop the engine and pull the wire off of the spark plug

(Fig. 6).

2. Remove the bolt securing the air cleaner cover

(Fig. 16).

3. Remove the cover and clean it thoroughly (Fig. 16).

Содержание Recycler 22170

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды