Toro Recycler 21332, Руководство оператора

Страница: 15 / 24

Recycling the Clippings
Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it before recycling the clippings. Refer to Removing the Grass Bag
(page 15) .
Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
WARNING
A worn grass bag could allow small stones and other similar debris to be thrown toward you
or bystanders, resulting in serious personal injury or death.
Check the grass bag frequently. If it is damaged, install a new Toro replacement bag.
Installing the Grass Bag
1. Lift up the rear deflector (A of Figure 13 ).
2. Insert the rod ends of the grass bag into the notches in the handle brackets (B of Figure 13 ).
3. Allow the rear deflector to rest on the bag.
g240796
Figure 13
Removing the Grass Bag
1. Lift up the rear deflector (A of Figure 13 ).
2. Lift the grass-bag handle out from the notches on the handle brackets and remove the bag from the
machine.
3. Close the rear deflector.
Operating Tips
General Mowing Tips
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
Avoid striking solid objects with the blade. Never
deliberately mow over any object.
•
If the machine strikes an object or starts to vibrate,
immediately shut off the engine, wait for all moving
parts to stop, disconnect the wire from the spark
plug, and examine the machine for damage.
•
For best performance, install a new Toro blade
before the cutting season begins or when
necessary.
Cutting Grass
•
Cut only about a third of the grass blade at a time.
Do not cut below 51 mm (2 inches) unless the
grass is sparse or it is late fall when grass growth
begins to slow down.
15