Toro Recycler 21131, Руководство оператора

Страница: 11 / 20

Using the Self-propel Drive
(model 21132 only)
To operate the self-propel drive, squeeze the self-propel drive
bar toward the handle and hold it
Figure 13 ).
g018106
Figure 13
1. Self-propel drive bar
To disengage the self-propel drive, release the self-propel
drive bar.
Note:
The maximum self-propel ground speed is fixed.
Stopping the Engine
To stop the engine, release the engine stop handle.
Important:
When you release the engine stop handle,
both the engine and the blade should stop within 3
seconds. If they do not stop properly, stop using your
mower immediately and contact an Authorized Service
Dealer.
Bagging the Clippings
Install the grass bag to collect the clippings.
1. Lift the rear deflector, remove the mulch plug ( Figure
15 ), and install the grass bag onto the lugs ( Figure 14 ).
g01771 1
Figure 14
1. Rear door 3. Grass bag
2. Lug
2. Release the rear door.
3. Mow with the grass bag attached.
4. When the bag is full, stop the engine, remove the grass
bag from the mower, and empty the contents.
Note:
To convert from bagging to recycling, remove the
grass bag, replace the mulch plug you removed in Step 1, and
lower the rear door (
Figure 15 ).
1
g017756
Figure 15
1. Mulch plug
11