![Toro Recycler 21131 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/toro/recycler-21131/recycler-21131_operators-manual_1132131012.webp)
Mowing Tips
Follow these instruction when cutting grass for the best
cutting results and lawn appearance.
•
Maintain a
sharp blade
throughout the mowing season.
•
Only mow dry grass.
Wet grass tends to clump on the
yard and may cause the mower to plug up or the engine
to stall. They may also be slippery to walk on and could
cause you to slip and fall.
•
While cutting single swaths, ensure an overlap of about
4 cm.
•
When cutting very tall grass, you may want to first mow
at the highest height-of-cut setting and a slower walking
speed; then mow again at a lower setting for best lawn
appearance.
•
If the finished cut lawn appearance is unsatisfactory, try
one or more of the following:
–
Sharpen the blade.
–
Walk at a slower pace while mowing.
–
Raise the height-of-cut setting on your mower.
–
Cut the grass more frequently.
–
Overlap cutting swaths instead of cutting a full swath
with each pass.
Maintenance
Toro has designed this product to give you years of trouble-free use. Should it need service, bring the product to an Authorized
Toro Service Dealer.
Note:
Determine right and left side from normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Check the engine oil level.
• Clean the mower housing.
Every 25 hours
• Clean the air filter.
• Check the self-propel cable and adjust if necessary (model 21132 only).
• Lubricate the machine.
• Sharpen the blade.
Every 50 hours
• Change the engine oil.
Every 2 years
• Replace the blade.
Cleaning the Mower Housing
Service Interval:
Before each use or daily
After each use, clean the mower housing.
Before cleaning, stop the engine, wait for all moving parts to
stop, and disconnect the spark plug lead.
Important:
Do not clean the mower with water.
Moisture can get trapped in the mower and may cause
corrosion of internal parts.
•
Clean the underside of the mower housing. Remove
dirt and grass clippings with a hardwood scraper/brush
(
G017667
Figure 16
•
Remove the debris from the housing vents along the top
of the mower and from the mower housing.
12
Содержание Recycler 21131
Страница 18: ...Notes 18 ...