Setup
Important:
Remove and discard the protective plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
1
Unfolding the Handle
No Parts Required
Procedure
WARNING
Unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
•
Do not damage the cable(s) when folding or unfolding the handle.
•
Ensure that the cable(s) are routed to the outside of the handle.
•
If a cable is damaged, contact an Authorized Service Dealer.
1.
Unlock the handle (A of
).
2.
Move the handle rearward to the operating position (B of
3.
Set the handle lock until the pin clicks in place to lock the handle into the operating position (C of
).
g232815
Figure 3
Note:
To adjust the handle height, refer to
Adjusting the Handle Height (page 10)
.
5
Содержание Recycler 20965
Страница 50: ...Hinweise ...
Страница 70: ...g189217 Figure 23 19 ...
Страница 94: ...g189217 Figura 23 18 ...
Страница 118: ...g189217 Figuur 23 18 ...
