Toro Recycler 20950, Руководство оператора, Страница: 4 / 20

Safety and Instructional
Decals
Important:
Safety and instruction decals are
located near areas of potential danger. Replace
damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
110-7178
1. Height of cut
110-7126
1. Warning—read the Operator's Manual.
2. Cutting, dismemberment hazard of hand or foot—remove
the spark plug wire before performing any maintenance
on the machine.
3. Thrown object hazard—keep bystanders a safe distance
from the machine.
4. Cutting, dismemberment hazard of hand or foot—stay away
from moving parts.
5. Thrown object hazard—keep deflector in place.
120-0193
1. Height of Cut
Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine.
1
Attaching the Handle
No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove the handle knobs from the mower housing
(Figure 3).
Important:
Route the cables to the outside of
the handle as you install the handle.
Figure 3
1. Handle knob (2)
2. Move the handle to the operating position.
3. Install and tighten the handle knobs that you
removed in step 1 (Figure 3).
4