Toro Recycler 20373, Руководство оператора

Страница: 6 / 24

2
Installing the Handle
No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove and retain the handle knobs from the machine
housing (
Figure 4 ).
Important:
Route the cables to the outside of the
handle knobs as you install the handle.
G020470
Figure 4
2. Move the handle to the operating position.
3. Install and tighten the handle knobs that you removed
in step
1 ( Figure 4 ).
3
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Pull the recoil-starter rope through the rope guide on the
handle (
Figure 5 ).
6