Toro Recycler 20332, Руководство оператора

Страница: 17 / 72

1
2
3
g030022
Figure 27
1. Battery cover 3. Fuse holder
2. Fuse
4. Replace the fuse in the fuse holder ( Figure 27 ).
Note:
Your machine comes with a spare fuse attached
to the battery-charger box ( Figure 28 ).
2
g030053
1
Figure 28
1. Battery compartment 2. Battery-charger box
5. Install the battery compartment with the screw that
you removed in step
3 .
6. Install the covering over the battery compartment.
7. Lower the rear deflector.
Replacing the Blade
Service Interval: Yearly
Important:
You will need a torque wrench to install the
blade properly. If you do not have a torque wrench or are
uncomfortable performing this procedure, contact an
Authorized Service Dealer.
Examine the blade whenever you run out of gasoline. If the
blade is damaged or cracked, replace it immediately. If the
blade edge is dull or nicked, have it sharpened and balanced,
or replace it.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Wear gloves when servicing the blade.
1. Refer to Preparing for Maintenance (page 14) .
2. Tip the machine onto its side with the dipstick down.
3. Use a block of wood to hold the blade steady ( Figure
29 ).
Figure 29
4. Remove the blade, saving all mounting hardware
(
Figure 29 ).
5. Install the new blade and all mounting hardware
(
Figure 30 ).
17