Toro Recycler 20332, Руководство оператора

Страница: 11 / 72

Removing the Grass Bag
To remove the bag, reverse the steps in Installing the Grass
Bag (page 10) .
Operating the Bag-on-Demand Lever
The bag-on-demand feature allows you to either collect or
recycle grass and leaf clippings while the grass bag is attached
to the machine.
•
For bagging the grass and leaf clippings, press the button
on the bag-on-demand lever and move the lever forward
until the button on the lever pops up (
Figure 17 ).
Figure 17
1. Bag-on-demand lever (in bagging position)
•
For recycling the grass and leaf clippings, press the button
on the lever and move the lever rearward until the button
on the lever pops up.
Important:
For proper operation, remove any grass
clippings and debris from the bag-on-demand door and
the surrounding opening (
Figure 18 ) before you move
the bag-on-demand lever from 1 position to another.
Figure 18
1. Clean here
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand
lever is in the Bagging position, move the lever to the
Recycling position; refer to
Operating the Bag-on-Demand
Lever (page 11) .
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute
(
Figure 19 ).
Figure 19
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector,
remove the side-discharge chute, and lower the side-discharge
deflector.
11