Form No. 3447-126 Rev A
Roller Shaft Kit
ProStripe
®
560 Mower
Model No. 134-6409
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
No parts required
–
Prepare the machine.
Shaft
1
Washer (M6 x 18)
1
Bolt (M6 x 25)
1
Install the kit.
No parts required
–
Finish the installation.
Preparing the Machine
WARNING
Tipping the machine may cause the fuel to
leak. Fuel is flammable and explosive, and
can cause personal injury.
Run the engine dry or remove the fuel with a
hand pump; never siphon the fuel.
1.
Run the engine dry or remove the fuel with a
hand pump.
2.
Move the machine to a level surface, shut off
the engine, wait for all moving parts to stop, and
allow the engine to cool.
3.
Disconnect the spark-plug wire from the spark
plug; refer to the
Operator’s Manual
for your
machine.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3447-126*
