Note:
This is the best time to install a new fuel filter
because the fuel tank is empty.
5.
Install the fuel line onto the fuel filter. Slide the hose
clamp close to the fuel filter to secure the fuel line
(Figure 30).
Cleaning the Engine Screen
and the Oil Cooler
Service Interval:
Before each use or daily
Before each use, check and clean the engine screen and oil
cooler. Remove any build up of grass, dirt or other debris
from the oil cooler and engine screen (Figure 31).
Figure 31
1.
Engine screen
2.
Oil cooler
Checking the Nozzle
Service Interval:
Before each use or daily
Checking the Nozzle Clamp
Check the nozzle clamp (Figure 32) daily to assure it is tight.
If the nozzle is dragged over obstacles or through low areas in
the terrain it could be knocked loose from the clamp. Torque
the clamp fasteners to 5.1-5.7 N-m (45-50 in-lb).
Figure 32
1.
Nozzle clamp
Cleaning the Nozzle Guides
Check and remove any grass, dirt or debris buildup around
and in between the nozzle guides (Figure 33). If the nozzle
guides are not keep free of debris, the nozzle may not rotate
freely which could cause the motor to stall.
G017855
1
Figure 33
1.
Nozzle guides
Adjusting the Belt
Service Interval:
After the first 8 hours
Every 50 hours
If the belt slips when changing the direction of the nozzle, an
adjustment to the belt is required.
1.
Loosen the bolts securing the pulley mounting bracket
to the blower frame (Figure 34).
Figure 34
1.
Belt
3.
Mounting bolt
2.
Pulley
26
Содержание ProForce 44539
Страница 30: ...Notes 30...
Страница 31: ...Notes 31...
