Toro NO FOUND TMC-424E, Руководство пользователя

Страница: 11 / 40

7
Set Program Start Times
NOTE: The TMC-424E enables a total of 16 unique start times to assigned to four programs
in any combination totaling 16. For example, program A could have 12 start time assignments,
which would leave four start time assignments available for programs B , C and D .
1. Turn the Function Dial to
Start Times
. The start time hour digit(s) will begin flashing.
2. Press the or button to select a start time number (01 to 16).
NOTE:
Any start time number currently assigned to another program can not be selected. If all 16
start time assignments are in use,
NONE
will be displayed.
3. Press the or button to select a start time hour (note the correct a.m./p.m. designation in
the 12-hour clock mode).
NOTE:
To remove a start time, select
-- --:-- --
(Off), located between the hours of 11:00 p.m.
and 12:00 a.m. (00 minutes).
4. Press the button to select minutes digits. Repeat step 3 to set start time minutes (00–59).
5. Repeat steps 2–4 to set additional start times for the selected program.
Set Watering Day Schedule
The TMC-424E series offers three watering day schedule formats. Each program can have any one
of the following schedule formats:
Calendar Days – Use this scheduling method to select specific days of the week.
Odd/Even
– Schedules days by odd-or even-numbered calendar days.
NOTE:
When an odd-numbered day schedule is used, watering will not occur on the 31st of any
month and February 29th of a leap year.
Day Interval
– Scheduling by Day Interval enables a specific number of days between watering to
be selected. For example, selecting a 1-day Interval
schedules watering to occur every day. A 2-day interval schedules watering
to occur every-other day. A 31-day interval is the maximum schedule, providing watering only
once every 31 days. Since the interval schedule is not tied to
specific days of the week, you will also need to determine when the interval
will start, by selecting the current day within the Interval.
• Day Exclusion
– When using the
Odd/Even
or
Day Interval
watering day schedule, watering
will not always occur on the same days each week.
To prevent watering on a specific days, for example, watering-restricted days, specific days of
the week can be easily excluded from the schedule.
NOTE: Each program can only have one assigned watering schedule format.
If either an Interval or Odd/Even schedule is currently set, it must be turned Off first to enable an
optional format to be selected.