Toro Multi Pro WM 41240, Руководство оператора

Страница: 22 / 84

g028852
Figure 18
1. Hairpin
3. Control mounting bracket
2. Pivot pin (control console) 4. Hand knob
3. Install the hand knob and tighten it to prevent the
console from rotating during operation (
Figure
18 ).
Installing the Control Console
Electrical Harness to the Machine
1. Install 2 J-clips in the center console at the
points located in
Figure 19 or Figure 20 using
the existing screws.
g002507
Figure 19
HD-Series models with an manual transmission
1. J-clip 3. Control-box harness
2. Existing screws 4. Center console
g028443
Figure 20
HDX-Auto Model
1. Center console 3. Existing screws
2. J-clip 4. Control-box harness
2. Install a J-clip behind the passenger seat using
a bolt (1/4 x 1/2 inch) and a flanged nut (1/4
inch) (
Figure 21 ).
g024089
Figure 21
1. J-clip
3. Secure the control console harness to the
console and ROPS cover using the J-clips
(
Figure 21 ).
22