Toro Multi Pro WM 41240, Руководство оператора

Страница: 18 / 84

4
Installing the Hold-down
Brackets for the Tank Skid
Parts needed for this procedure:
2 Hold-down brackets
Procedure
1. Remove the 2 rear flanged-head bolts and 2
flanged locknuts that secure the support bracket
for the engine tube to the frame of the machine
(
Figure 8 ).
Note:
Retain the fasteners for later use.
g028410
Figure 8
1. Rear hole—support
bracket (engine tube) 4. Engine support tube
2. Flanged locknut 5. Lift cylinder
3. Flanged-head bolt
2. Rotate the lift cylinder to provide clearance to
install the hold-down bracket for the tank skid
(
Figure 8 ).
3. Assemble the hold-down brackets to support
bracket and frame the using the 2 flanged-head
bolt and flange locknut removed in step
1 ( Figure
9 ).
g028421
Figure 9
1. Support bracket (engine
tube) 3. Flanged-head bolts
2. Hold-down bracket (tank
skid) 4. Lift cylinder
4. Torque the bolts and nuts to 91 to 113 N-m (67
to 83 ft-lb).
5. Repeat steps 1 to 4 at the opposite side of the
machine.
18