Toro Multi Pro 315000001, Руководство оператора

Страница: 5 / 12

4
Installing the Spray-Gun Valve
Parts needed for this procedure:
1 Spray-gun valve
1 Hose-reel supply hose
1 Flange clamp
1 Gasket
1 Fitting, 90-degree
1 Hose clamp
Procedure
1. Remove the flange clamp that secures the endcap and
coupler at the pressure-gauge port (
Figure 7 or Figure
8 ).
Figure 7
Multi Pro 1750 and Multi Pro WM
1. Gasket 4. Coupler
2. 90-degree fitting 5. Control valve
3. Gasket clamp 6. Hose-reel supply hose
g028390
Figure 8
Multi Pro 5800
1. Gasket 4. Coupler
2. 90-degree fitting 5. Control valve
3. Flange clamp 6. Hose-reel supply hose
2. Remove the coupler from the endcap ( Figure 7 and
Figure 8 ).
3. Install the control valve assembly as shown in Figure 7
or Figure 8 .
4. Install the coupler into the open port on the 90-degree
fitting (
Figure 7 or Figure 8 ).
Note:
The port in the side of the 90-degree fitting for
the Multi Pro 1750 and Multi Pro WM is at the forward
side (not shown) of the fitting in
Figure 7 .
5. Connect the hose-reel supply hose to the control valve
using a hose clamp (
Figure 7 or Figure 8 ).
5