background image

Form No. 3393-261 Rev B

Hand Spray Wand Kit

2015 and After Multi Pro

®

1750, Multi Pro

®

5800, or Multi Pro

®

WM Turf Sprayer

Model No. 41118—Serial No. 315000001 and Up

Operator's Manual

The hand spray wand kit is an attachment for a turf spray application vehicle and is intended to be used by professional, hired
operators in commercial applications. It is primarily designed for spraying on well-maintained lawns in parks, golf courses,
sports fields, and on commercial grounds.

You may contact Toro directly at www.Toro.com for product safety and operation training materials, accessory information,
help finding a dealer, or to register your product.

WARNING

CALIFORNIA

Proposition 65 Warning

This product contains a chemical or chemicals known to the State of California to

cause cancer, birth defects, or reproductive harm.

Use of this product may cause exposure to chemicals known to the State of California

to cause cancer, birth defects, or other reproductive harm.

This product complies with all relevant European directives. For details, please see the Declaration of Incorporation (DOI) at
the back of this publication.

© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3393-261* B

 

Содержание Multi Pro 315000001













Отзывы: