October 2014©
Toro MP5700 ROPS Cab Operator Manual
Limited Warranty
Tektite Manufacturing Inc. (Tektite) warrants to the original purchaser (the “Claimant”), that Tektite products will be free
from defective materials or workmanship, under normal use and service, for a period of (1) full year (or 1500 hours,
whichever is less) from the original invoice date. Tektite’s liability under this Limited Warranty is limited to the repair or
(at the discretion of Tektite) the replacement of those components of its products, which were manufactured by Tektite
that are defective in materials or workmanship. Tektite shall have no liability under this Limited Warranty unless Tektite
is notified of the defect during the stated Warranty Period.
All returns require a Returned Material Authorization Number (RMA#). Warranty claims must be submitted to Tektite at
1-204-331-3463 prior to written authorization. All warranty work not pre-authorized by Tektite will not be covered by
this warranty agreement. Claimant must arrange shipping of the returned and repaired or replaced product or
component from Tektite plant in Winkler, Manitoba at the Claimant’s own risk and expense. Tektite must receive all
returns within (30) days of issuance of a RMA#. Limitations and Exclusions: Tektite has no responsibility to a Claimant
under this Limited Warranty or on any other basis for any of the following:
a) defects caused, in whole or in part, by accident or misuse, negligence or failure to maintain the product or component
;
b) products or components sold to a customer on an “as is” basis;
c) wiper blades, light bulbs, fuses, clear vinyl or other consumables;
d) glass where the point of failure has not been preserved intact and delivered to Tektite for analysis of the cause of the
failure;
e) products or components which have been modified after shipping from Tektite to its customer;
f) transportation charges for returned, repaired or replacement items;
g) defects that are subject of an Tektite initiated recall where the Claimant fails to comply with the terms of the recall
notice that comes to the attention of the Claimant;
h) components of Tektite products that are manufactured by third parties (Tektite’s only obligation in relation to such
components shall be to accord to the Claimant the benefit of any transferable warranty accorded to Tektite by third
party manufacturer);
i) defects in workmanship or materials in products or components that are repaired or replaced by Tektite unless Tektite
is notified of the new defect within the Warranty Period that applied to the original product or component that has been
repaired or replaced;
j) defects that result, in whole or in part, from inadequate engineering or specifications provided to Tektite by its
customer;
k) any actual or alleged deficiency in technical or engineering services or advice provided by Tektite to its customer
whether provided for valuable consideration or otherwise;
l) consequential damages, or any other damages whether foreseeable or not, resulting from the defect or any delay in
remedying the defect; and
m) any breach or alleged breach of any implied warranty of merchantability or fitness for particular purpose of use;
n) defects or part failure due to misuse or failure to follow recommended cab installation procedures;
o) travel expenses, including mileage.
This Limited Warranty expresses the entire obligation of Tektite, its officers, directors, agents and employees, to its
customer or any Claimant in respect of any defect in workmanship, or materials of any product or component sold or
manufactured by Tektite whether on grounds of breach of contract, negligence or other tortuous liability, breach of
express or implied warranty or other basis in law of any jurisdiction.
Acceptance by a customer of delivery of products of Tektite constitutes acceptance of this Limited Warranty in lieu of all
other warranties express or implied including without limitation all implied warranties of merchantability or fitness for
particular purpose or use and constitutes acceptance by customer of the exclusions and limitations of the liability of
Tektite set out above.
*Labor rate fixed at a maximum of $75.00 per hour (U.S.) and $75.00 per hour (CDN) based on Tektite determination of
applicable hours.
