Toro LT2240, Руководство оператора

Страница: 49 / 68

g348598
Figure 77
3. Unlatch and open the hood ( Figure 77 ).
4. Clean the inside of the hood screens with
compressed air (
Figure 77 ).
5. Thoroughly clean all debris out of the engine
area.
6. Clean the oil cooler with low-pressure (50 psi)
compressed air (
Figure 78 ).
g348599
Figure 78
1. Oil-cooler latches
7. Rotate the oil cooler latches inward, and pivot
the oil cooler (
Figure 78 and Figure 79 ).
g348600
Figure 79
1. Radiator
8. Working from the fan side of the radiator ,
blow out debris with low-pressure (50 psi)
compressed air (
Figure 79 ). Repeat this step
at the front of the radiator, and again from the
fan side. Thoroughly clean both sides of the
oil cooler.
Important:
Do not use water to clean the
radiator and oil cooler.
9. Clean out any debris that may have collected on
other parts of the machine with compressed air.
10. Pivot the oil cooler up and secure it with the
latches.
11. Close and latch the hood.
49