Identifying the Tie-Down
Points
g280193
Figure 41
1.
Front tie-down point
2.
Rear tie-down point
Hauling the Machine
•
Use full-width ramps for loading the machine onto
a trailer or truck.
•
Tie the machine down securely.
Towing the Machine
Ensure that the towing vehicle can control the
combined weight of both vehicles; refer to
Specifications (page 17)
.
Raising the Cutting Units
Whenever possible, raise and latch the cutting units
before towing the machine.
Releasing the Wheel-Motor Brakes
1.
Engage the parking brake and chock the wheels
of the towing vehicle.
2.
Chock the front wheels of the machine.
3.
Raise the platform forward; refer to
.
4.
Remove the 2 bolts (12 x 40 mm) and 2 washers
(12 mm) stored in the platform support rails
(
).
g292366
Figure 42
1.
Bolt (12 x 40 mm) and
washers (12 mm)
2.
Platform support rail
5.
Connect a
rigid
tow bar between the front tow
ring of the machine and the tow vehicle (
g328268
Figure 43
6.
At the right, front wheel motor brake assembly
remove the hex plug (
).
28
