0
START TIMES Setup
The START TIMES setup will instruct the controller the time to activate the selected program
during an active watering day. Lawn Master II provides three start times per program to
accommodate all your irrigation needs.
Step 1 – Place the function dial to the START TIMES
position.
Step 2 – Press
PRG
to select the program being modified. Select from
A
,
B
or
C
.
Step 3 – Press
or
to select the START TIME number (1, 2 or 3) being modified.
Step 4 – Press
or
to adjust the time to the desired START TIME. For unused start
times, make sure
OFF
is displayed. OFF is located between 11:45pm and 12:00am.
Each key -press will increase or decrease the start time by 15 minutes.
Step 5 – Repeat steps 2–4 for the remaining start times and programs as necessary.
Step 6 – Return the function dial to
RUN
when finished.
IMPORTANT!
A program which is set to start while a watering cycle is in progress will
be delayed (stacked) until the current watering cycle is completed. Any stacked programs that
are delayed past midnight will be canceled.
