Toro HoverPro 400, Руководство оператора

Страница: 7 / 20

Setup
Note:
Determine right and left side of the machine
from normal operating position.
1
Assembling the Handle
No Parts Required
Procedure
1. Slide the lower handle into the frame ( Figure 3 ).
g017374
1
2
3
4
5
6
g017374
Figure 3
1. Footstop 4. Retaining pin
2. Hairpin 5. Washer
3. Bolt 6. Locknut
2. Secure each side with a retaining pin and a
hairpin (
Figure 3 ).
3. Secure the footstop to the right side of the lower
handle using an M6 nut, and M6 bolt, and 2
washers (
Figure 3 ).
4. Attach the footstop to the frame with a retaining
pin and a hairpin (
Figure 3 ).
5. Connect the upper handle to the lower handle by
securing each side with a U-bolt, an M6 washer,
and a handwheel (
Figure 4 ).
g017373
1
2
3
4
5
g017373
Figure 4
1. Upper handle 4. U-bolt
2. Hand wheel 5. Lower handle
3. Washer
2
Filling the Engine with Oil
No Parts Required
Procedure
Important:
Your machine does not come with oil
in the engine. Before starting the engine, fill the
engine with oil.
Max. fill: 0.59 L (20 fl oz), type: Multigrade Mineral
10W-30 oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.
1. Move the machine to a level surface.
2. Remove the dipstick ( Figure 5 ).
7