Toro Groundsmaster 7210, Руководство по обслуживанию

Страница: 292 / 342

Disassembling the Cutting Deck Lift Arms (continued)
g033698
Figure 205
1. HOC pin 2. HOC bracket
g033699
Figure 206
1. T-bar (4 each) 4. Clevis pin (4 each)
2. Clevis yoke (4 each) 5. Flange nut (8 each)
3. Cotter pin (4 each) 6. Cutting deck
2. Note the location of the HOC pin in the HOC bracket for assembly purposes,
and remove the HOC pin from the HOC bracket ( Figure 205 ).
3. Start the engine and fully lower the cutting deck. Shut off the engine, and
remove the key from the key switch.
4. Remove the lift arm components as shown in Figure 204 and Figure 206 .
Chassis: Service and Repairs Page 6–30 Groundsmaster 7210
16222SL Rev C