Toro Groundsmaster 3300 Series, Руководство оператора

Страница: 48 / 68

g309237
Figure 52
1. Fuel-filter head 2. Fuel filter
2. Remove the filter and clean the filter head
mounting surface (
Figure 52 ).
3. Lubricate the filter gasket with clean lubricating
engine oil; refer to the engine owner's manual
for additional information.
4. Install the dry filter canister by hand until the
gasket contacts the filter head, then rotate it an
additional 1/2 turn.
5. Start the engine and check for fuel leaks around
the filter head.
Cleaning the Fuel Tank
Service Interval: Yearly—Drain and clean the fuel
tank
Drain and clean tank if fuel system becomes
contaminated or if you store the machine for an
extended period. Use clean diesel fuel to flush out
the tank.
Inspecting the Fuel Lines
and Connections
Service Interval: Every 400 hours/Yearly (whichever
comes first)
Inspect the fuel lines for deterioration, damage, or
loose connections.
Electrical System
Maintenance
Electrical System Safety
•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.
Accessing the Battery
The battery is adjacent to the fuel tank on the left side
of the machine. To access the battery, raise the hood,
unscrew the thumb screw that secures the cover over
the battery, and remove the cover (
Figure 53 ).
Note:
The screw is retained with a locking washer.
g289491
Figure 53
1. Battery cover 2. Thumb screw
48