Toro Groundsmaster 3300 Series, Руководство оператора

Страница: 42 / 68

Lubrication
Greasing the Bearings and
Bushings
Service Interval: Before each use or daily—Grease
the PTO driveshaft (cross-bearings
and telescoping splines).
Every 50 hours—Grease the bearings and
bushings.
The machine has grease fittings that you must
lubricate regularly with No. 2 lithium grease.
Important:
Lubricate the machine immediately
after every washing.
•
Idler arm ( Figure 40 )
g300631
Figure 40
1. Idler arm
•
PTO driveshaft ( Figure 41 )
Important:
Grease the driveshaft before each
use or daily.
g303694
Figure 41
1. Grease fittings
•
Axle pivot pin ( Figure 42 )
g308668
Figure 42
1. Axle pivot pin
•
Front of the machine ( Figure 43 ):
– Attachment pin joints(2)
– Lift-cylinder bushings (2)
– Lift-arm pin joints (2)
42