Toro Groundsmaster 139-1030, Руководство по установке

Страница: 4 / 12

5
Installing the Contactor
Parts needed for this procedure:
1 Contactor
1 Contactor mount
1 Cable
4
Nut (1/4 inch)
2 Nut (5/16 inch)
2 Flange bolt
2 Carriage bolt
Procedure
1. Use 2 carriage bolts and 2 nuts (1/4 inch) to
secure the contactor mount to the bracket
(
Figure 7 ).
g282536
Figure 7
1. Carriage bolt 3. Nut (1/4 inch)
2. Contactor mount
2. Use 2 flange bolts and 2 nuts (1/4 inch) to secure
the contactor to the contactor mount (
Figure 8 ).
g282537
Figure 8
1. Contactor 3. Nut (1/4 inch)
2. Flange bolt
3. Use a nut (5/16 inch) to secure the end of the
cable with the boot attached to the contactor
(
Figure 9 ).
g282535
Figure 9
1. Nut (5/16 inch) 3. Nut (5/16 inch)
2. Cable
4. Use a nut (5/16 inch) to secure the other end
of the cable to the right post of the fuse holder
(
Figure 9 ).
5. Install the wire connector labeled
COIL
+ [28
V
M
ASTER
C
ONTACTOR
] to the left post at the top of
the contactor ( Figure 10 ).
4