Toro Groundsmaster 1000L, Руководство по обслуживанию, Страница: 14 / 352

GROUNDSMASTER® 220-D, 223-D, 224 Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
400hrs
200hrs
100hrs
Check Battery Fluid Level 50hrs
Check Battery Cable Connections
Lubricate All Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Change Engine Oil A Level
Inspect Air Filter, Dust Cup, and Baffle
Service
‡ Replace Engine Oil Filter
Check Electric Clutch Gap Adjustment
† Check PTO Belt Tension
† Check Fan and Alternator Belt Tension B Level
Inspect Cooling System Hoses
Service
Service Air Filter
Replace Gasoline Fuel Filter (gas unit)
Check Rear Wheel Toe-In and Steering Linkage
† Replace Transmission Filter C Level
† Torque Wheel Lug Nuts
Service
Drain and Clean Fuel Tank (diesel unit)
Change Cutting Unit Gear Box Oil
Change Electric Fuel Pump Filter
Change Diesel/WaterSeparator Filter
Rear Axle Service
- pack rear wheel bearings (2WD)
- change rear axle lubricant (4WD)
Coat Transmission Bypass Pins with Grease
Replace Spark Plugs (gasoline unit) D Level
‡ Torque Head, Adjust Valves, and Check Engine RPM
Service
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Annual Recommendations:
Coolant System - Flush/Replace Fluid
Change Hydraulic Oil
Items listed are recommended every
1000 hours or 2 years whichever occurs
first.
(See Operator's and Service Manual for specifications and procedures)