Toro GreensPro 1240, Руководство по обслуживанию

Страница: 40 / 186

General Information
g238094
Figure 5
1. Fuel tank 4. Recoil-start handle
2. Air cleaner 5. Spark plug
3. Recoil starter
6. Muffler
This chapter gives the information about specifications and repair of the Honda
GX200 gasoline engine used in the GreensPro 1240 and 1260 machines.
Described adjustments and repairs require tools that are commonly available in
many service shops.
Some service and repair parts for the engine in your GreensPro machine are
supplied through your Authorized Toro Distributor. Be prepared to provide your
distributor with the Toro Model and Serial Number of your machine to obtain parts.
When disposing of hazardous waste products (fuel, engine oil, hydraulic fluid,
filters, etc.), take them to an authorized disposal site. Waste products must not
be allowed to contaminate surface water, drains, or sewer systems.
Operator’s Manual
The Operator’s Manual provides information regarding the operation, general
maintenance, and maintenance intervals for your GreensPro machine. Refer to
the
Operator’s Manual for additional information when servicing the machine.
Engine Owner’s Manual
The engine Owner’s Manual provides information regarding the operation,
general maintenance, and maintenance intervals for the Honda GX200 engine
used on your GreensPro 1240 and 1260 machines. Contact your local Honda
Engine Dealer or visit
http://engines.honda.com to obtain a copy of the engine
Owner’s Manual . Refer to the engine Owner’s Manual for additional information
when servicing the machine.
Engine: General Information Page 4–2 GreensPro ™ 1240/1260
14211SL Rev A