Toro GreensPro 1240, Руководство по обслуживанию

Страница: 128 / 186

General Information
The Operator’s Manual provides information regarding the operation, general
maintenance, and maintenance intervals for your GreensPro machine. Refer to
the
Operator’s Manual for additional information when servicing the machine.
Steering Operation
The steering system of the GreensPro machines includes a number of
components that cause the front and rear steering head to turn when the
operator moves the steering wheel. The rotation of the steering heads allows the
machine to change the direction. The amount the steering wheel can be turned
is limited, so the turning circle of the greens roller is relatively large.
GreensPro 1240 Steering System
g239307
Figure 50
GreensPro 1240
1. Rear steering head 6. Steering pivot rod
2. Front steering head 7. Steering pivot
3. Rear steering head linkage arm 8. Steering column assembly
4. Steering disc assembly 9. Steering wheel
5. Front steering head linkage arm
The steering system components include the steering wheel and attached
steering column, which is connected to the steering pivot, steering pivot rod,
steering disc assembly, front and rear steering head linkage arms, and front and
rear steering head assemblies (
Figure 50 ). With the exception of the steering
wheel and steering column, the steering system components are attached to
the underside of the chassis.
When the steering wheel is turned by the operator, the steering pivot is rotated.
Steering pivot movement causes the steering disc assembly to be rotated
through the steering pivot rod. The steering disc assembly is connected to 2
Chassis: General Information Page 7–2 GreensPro ™ 1240/1260
14211SL Rev A