Toro Greensmaster eFlex 2120 04046, Руководство оператора, Страница: 12 / 48

g017238
Figure 11
1. Tall nut
5. Loosen the 2 pivot bolts/nuts a half turn each
(
Figure 12 ).
g017295
Figure 12
1. Battery pack 4. Pivot bolts
2. Battery platform
5. Locking holes
3. Bolt and washer
6. Raise the battery platform until the locking holes
in the base and frame align (
Figure 12 ).
Note:
Slide a screwdriver or other steel rod
through the holes to hold the platform in the
raised position.
7. Place the battery pack on the base with the
connector port toward the rear of the machine.
8. Secure the battery pack to the base with the 6
bolts (5/16 x 1/2 inch) and 6 washers.
Note:
Torque each bolt to 11.3 to 14 N∙m (100
to 130 in-lb).
9. Line up the tabs on the inside of the harness
power plug with the slots in the battery pack
receptacle.
Note:
Press the harness connector into the
battery connector ( Figure 13 and Figure 14 ).
g017236
Figure 13
1. Battery-pack receptacle 3. Pack the machine to the
wire-harness plug
2. Locking collar 4. Bolt securing the battery
pack
g017358
Figure 14
10. Rotate the locking collar on the harness plug
clockwise until it engages with the battery
receptacle and begins to pull in toward the
battery.
Note:
Continue turning it another 120° (1/3 of a
turn) until it fully seats.
Note:
If you cannot mate the battery pack
receptacle with the machine wire harness plug
while the battery pack is installed, you can
instead connect the harness to the battery pack
12