2
Removing the Mower Deck
No Parts Required
Procedure
Refer to the Removing the Deck procedure in the
Operator’s Manual
for your machine. Retain the
fasteners securing the strut bracket to the machine.
3
Positioning the Casters
No Parts Required
Procedure
Remove the nut and bolt from each caster, move the
caster to the middle position, and install the nut and
bolt (
). Torque to 91 to 113 N∙m (67 to 83 ft-lb).
g210119
Figure 3
1.
Nut and bolt
2.
Middle position
4
Installing the Lock Bracket
Parts needed for this procedure:
1
Lock bracket assembly
Procedure
1.
Remove the 4 carriage bolts (3/8 x 2-1/2 inches),
4 nuts (3/8 inch), and the existing lock bracket
(
).
g210329
Figure 4
1.
Carriage bolt (3/8 x 2-1/2
inches)
3.
Lock bracket
2.
Nut
2.
Use the fasteners that you just removed to install
the snowthrower lock bracket (
). Torque
to 37 to 45 N∙m (27 to 33 ft-lb).
g210328
Figure 5
1.
Carriage bolt (3/8 x 2-1/2
inches)
3.
Snowthrower lock bracket
2.
Nut
6
