Toro GrandStand 72504TE, Руководство оператора

Страница: 15 / 60

Disengaging the Mower Blades
(PTO)
Figure 10 and Figure 11 show 2 ways to disengage
the mower blades.
g301401
Figure 10
g031593
Figure 11
Note:
If you disengage the mower blades by
releasing the motion-control levers, you can engage
the blades again by pressing the O
N
position of the
switch ( Figure 9 ) without pressing the O
FF
position
first.
Operating the Throttle
You can move the throttle control between F
AST
and
S
LOW
positions ( Figure 12 ).
Always use the F
AST
position when engaging the PTO.
g008946
Figure 12
Operating the Choke
Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch (
Figure 13 ).
2. Push down the choke knob to disengage the
choke after the engine has started (
Figure 13 ).
g008959
Figure 13
1. O
N
position 2. O
FF
position
15