Toro E-Z Vac 79345, Руководство оператора, Страница: 21 / 120

18. Secure the tubes together with the nuts (1/4
inch) as shown in
Figure 31 .
19. Insert the upper discharge tube through the tube
seal in the hood.
20. Pull the upper tube out slightly so that the seal
extends outward and over the blower assembly
(
Figure 29 ).
21. Use both latches to attach the lower tube to the
blower assembly (
Figure 28 ).
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
WARNING
To avoid personal injury, follow these
procedures:
• Become familiar with all operating and
safety instructions in the
Operator's
Manual for the mower before using this
attachment.
• Never remove the discharge tube, bags,
bagger hood, or the chute while the engine
is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never perform maintenance or repairs
while the engine is running.
Emptying the Grass Bags
Be careful when lifting or handling a grass bag that is
full. To empty the grass bags:
1. Park the machine on a level surface.
2. Disengage the blade-control switch, engage
the parking brake, and move the motion-control
levers outward to the
NEUTRAL
-
LOCK
position.
3. Shut off the engine and remove the key.
4. Raise the bagger hood ( Figure 32 ).
g005758
Figure 32
5. Compress the debris into the bags.
6. With both hands, lift up on the bag and unhook it
from the retaining bracket, empty the bag.
7. Repeat the procedure for the other bag.
8. Install the bags by sliding the bag frame hooks
onto the retaining brackets (
Figure 33 ).
19