
2001
The Toro Company
All Rights Reserved
Printed in USA
1
Form No. 3324-739
Part No. 98-2671
Replacement Handle Assembly
Installation
Instructions
for Part No. 11-2239
The original handle for lawn mower model 20700 is no
longer available. Install the replacement handle provided
in the handle kit according to these instructions.
Contents of the Kit
DESCRIPTION
QUANTITY
Upper handle
1
Lower handle
1
Handle latches
2
Long shoulder screws
2
Short shoulder screws
2
Locknuts
6
Spacers
2
Handle pins
2
Handle knobs
2
Handle screws
2
Removing the Original Handle
1. Remove the throttle control from the upper handle
(Fig. 1).
2. Remove the cable clip from the handle, and move the
throttle control and the throttle cable away from the
upper and lower handles (Fig. 1).
3. Remove the knobs and screws that secure the upper
handle to the lower handle (Fig. 1).
3
2
1
4
5
6
7
Figure 1
1.
Lower handle
2.
Throttle control
3.
Upper handle
4.
Knob (2)
5.
Lawn mower deck
6.
Cable clip
7.
Handle latch (2)
4. Remove the lower handle from the lawn mower deck
(Fig. 1).
5. Remove the handle latches from the lawn mower deck
(Fig. 1).
6. Discard the upper and lower handles, the handle
latches, the knobs, and the old hardware.