Installation
2
m–2911
1
2
3
Figure 1
1.
Hose
2.
Coupling
3.
Fitting
4.
Select a location with the hose fitting assembly
on left side of mower inside the preferred
location diagram (Fig. 2 or 3).
Note:
Hose should not interfere with wheels,
handles or controls.
IMPORTANT: Location must be on a flat
surface and not obstructing any decals.
IMPORTANT: Look under mower, location
must be inside blade cutting circle away from
any mulching baffles and not interfere with
any other mower hardware.
Riding Mowers
m–2855
2
1
Figure 2
1.
Left side of mower
2.
–––– Preferred location
Walk-Behind Mowers
2
1
m–2859
Figure 3
1.
Left side of mower
2.
–––– Preferred location
Mark and Drill Holes
5.
Use fitting as a template and mark the location
of two mounting holes (Fig. 4).
6.
Place a straight edge between mounting holes
and mark the center line (Fig. 4).
7.
Measure half-way between mounting holes and
mark water hole location (Fig. 4).
8.
Center punch and drill two (2) 9/32” (8 mm)
mounting holes and one (1) 3/8” (9.5 mm) water
hole (Fig. 4).
m–2856
2
2
1
3
4
1”
1”
Figure 4
1.
Fitting
2.
Mounting holes 9/32”
(8 mm)
3.
Center line
4.
Water hole 3/8” (9.5 mm)