Installation
8
m–3446
Figure 10
3.
With the High–Low range selector in neutral
“N,” pull the tractor forward toward the
snowthrower until the end of the snowthrower
frame is just underneath the tractor’s front
Attach-A-Matic
hitch (Fig. 11).
4.
Ensure the latches on the tractor’s front
Attach-A-Matic
are open. Then slide the
pulley box completely into the Attach-A-Matic
hitch. Close the latches by rotating them down
(Fig. 11).
m–4344
1
2
Figure 11
1.
Attach–A–Matic
hitch
latches
2.
Pulley box
5.
Install (2) “C” shaped pins into the locking holes
of the pulley box. Secure them with (2) small
hairpin cotters on the inside (Fig. 12).
m–4345
1
2
3
4
Figure 12
1.
Pulley box
2.
“C” shaped pin
3.
Attach–A–Matic
latch
4.
Hairpin cotter–small
6.
Now connect the snowthrower frame to the mid
Attach-A-Matic
hitch. You will need the crank
support to help with this.
A.
Continue pulling the tractor toward the
snowthrower until the snowthrower frame
connecting pins are directly below the mid
Attach–A–Matic
hitch (Fig. 13)
