Toro 78551, Руководство пользователя

Страница: 4 / 8

For Units without Bolts
1. Remove the nuts on the existing mower-deck pulley
(
Figure 5 ).
2. Install the new pulley assembly onto the mower-deck
pulley bolts (
Figure 5 ).
3. Turn the pulley to lock it into position ( Figure 5 ).
4. After the new pulley assembly is in position, install the
nuts to secure new pulley assembly.
Note:
Torque the nuts to 28 to 34 N-m (21 to 25 ft-lb).
g017234
1
2
3
4
1
2
Figure 5
1. Pulley
assembly 2. Mower-deck
pulley 3. Locking
slots 4. Nuts
5. Install the deck belt.
4
Installing the New Belt Cover
Bracket
48- and 52-inch Mowers
Parts needed for this procedure:
1 Belt cover bracket
2 Carriage bolt (1/4 x 3/4 inches)
2 Locknut (1/4 inch)
Procedure
Install the belt cover bracket with 2 carriage bolts (1/4 x 3/4
inches) and 2 locknuts (1/4 inch) as shown in
Figure 6 .
Figure 6
1. Locknut, (1/4 inch) 3. Carriage bolt (1/4 x 3/4
inches)
2. Bracket for 48- and 52-inch
mower decks
4