Toro 78534, Руководство оператора

Страница: 9 / 28

Figure 9
1. Hood assembly 4. Notch
2. Bag 5. Bagger frame
3. Bag tab
4. Lower the bagger hood over the bags ( Figure 10 ).
Figure 10
1. Hood 3. Bagger latch
2. Bag 4. Latch hook
5. Position the bagger latch under the latch hook ( Figure
11 ).
6. Push down on the bagger latch until it locks into place
(
Figure 11 ).
Figure 11
1. Bagger latch 2. Latch hook
5
Routing the Bagger Belt into
the Blower Assembly
Parts needed for this procedure:
1 Bagger belt (from the Blower and Drive Kit)
Procedure
1. Install the belt around the blower pulley ( Figure 12 ).
2. Install the spring to the idler arm and the peg on the
blower assembly (
Figure 12 ).
Figure 12
1. Idler pulley 4. Peg
2. Mower-deck pulley 5. Belt
3. Spring 6. Blower pulley
9