Note:
There is a latch on the top and bottom
of the blower housing.
g003449
Figure 35
1.
Blower assembly
3.
Latch (twin bagger shown)
2.
Lower tube
7.
Ensure that the machine deck is in the lowest
height-of-cut position.
8.
Verify that the dimple from
is still in
place.
9.
Using the 3 holes or indentations in the upper
tube as a template, and drill 3 holes (7/32 inch
diameter) where the upper and lower tubes join
together (
).
g037981
Figure 36
1.
Bagger hood
4.
Blower assembly
2.
Upper tube
5.
Drill holes (7/32 inch)
3.
Lower tube
10.
Remove the lower tube from the blower housing.
23
