6
Setup
Note: Determine the left and right sides of the machine
from the normal operating position.
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION
QTY.
USE
Grass deflector
Spring
Washer, 1/2 in.
Cotter pin, 3/4 in.
Plastic washer
Rubber bushing
Lock nut, 3/8 in.
1
1
1
1
2
1
1
Installing the grass deflector
Rear link
Washer
Cotter pin
Adjustable links
Washer, 1/2 in.
Cotter pin, 1 in.
1
1
1
2
2
2
Installing the rear link and front mounts
Hairpin cotter–large
Washer, 3/4 in.
Hairpin cotter–small
Washer, 1/2 in.
2
2
3
3
Installing the mower
Operator’s Manual
1
Read before operating
Installing the Grass Deflector
1. Place the short end of the spring into the small hole in
the grass deflector (Fig. 2).
2. Position spring and grass deflector over post on rear of
deck and secure with a washer (1/2 in.) and a cotter pin
(3/4 in.) (Fig. 2).
3. Slide rubber bushing and plastic washer over stud at
front of mower.
4. Place grass deflector over stud and secure with a second
plastic washer and a jam nut (3/8 in.) (Fig. 2).
