Installation
10
Removing the Mower
1.
Park the machine on a level surface, disengage
the power take off (PTO), set the parking brake,
and turn the ignition key to “OFF” to stop the
engine. Remove the key.
2.
Turn the front wheels fully to the left and raise
attachment lift lever all the way to the latched
position; refer to tractor Operator’s Manual.
3.
Remove mower drive belt from engine pulley.
4.
Remove small hairpin cotters and washers from
front adjustable links and remove from front lift
arm (Fig. 12).
m-2430
2
3
2
1
Figure 12
1.
Adjustable link
2.
Front lift arm
3.
Washer 1/2” (13 mm)
4.
Hairpin cotter-small
5.
Remove small hairpin cotter and washer from
rear link and remove from attachment lift
(Fig. 13).
6.
Remove hairpin cotters and washers from rear
lift arms (Fig. 13).
7.
Slide deck right, off rear lift arms (Fig. 13).
m-2445
1
3
2
5
4
7
6
Figure 13
1.
Lift arms
2.
Washer 3/4” (19 mm)
3.
Hairpin cotter-large
4.
Attachment lift
5.
Rear link
6.
Washer 1/2” (13 mm)
7.
Hairpin cotter-small
8.
Raise attachment lift all the way to the latched
position. Turn the front wheels, as necessary, and
slide the mower out to the the right side.
Note:
Save all hardware, washers and hairpin
cotters for use when installing deck.
