Toro 75501, Руководство оператора

Страница: 21 / 40

Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades.
Engaging the Blade-Control
Switch (PTO)
Ensure that the drive-mode switch is in the F
ORWARD
or N
EUTRAL
position before engaging the mower
blades. Refer to Reverse-Mowing Operation (RMO)
Button (page 16) for mowing in reverse.
g008945
Figure 18
Disengaging the Blade-Control
Switch (PTO)
Note:
The mower blades automatically disengage
when operating the machine in reverse (when not
using the reverse-mowing button) or when the
operator rises from the seat.
g009174
Figure 19
Adjusting the Height of Cut
You can adjust the height of cut from 25 to 127 mm
(1 to 5 inches). Pull the lever to the right, move it to
the desired height, and release the lever into the slot.
Refer to the table for the height-of-cut positions.
g369282
Figure 20
Height-of-Cut Position Height
1 25.0 mm (1.0 inch)
2 31 mm (1.2 inches)
3 39 mm (1.6 inches)
4 49 mm (1.9 inches)
5 61 mm (2.4 inches)
6 73 mm (2.9 inches)
7 86 mm (3.4 inches)
8 100 mm (3.9 inches)
9 113 mm (4.47 inches)
10 127 mm (5 inches)
21