Toro 74955, Руководство оператора

Страница: 19 / 68

Releasing the Parking Brake
g027335
Figure 11
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the mower
blades and any powered attachments.
Engaging the Blade-Control Switch
(PTO)
Note:
Engaging the blade-control switch (PTO) with the
throttle position at half or less will cause excessive wear to
the drive belts.
G008945
Figure 12
Disengaging the Blade-Control Switch
(PTO)
G009174
Figure 13
Operating the Throttle
The throttle control can be moved between the Fast and
Slow positions ( Figure 14 ).
Always use the fast position when turning on the mower deck
with the blade-control switch (PTO).
G008946
Figure 14
Operating the Ignition Switch
1. Turn the ignition key to the Start position ( Figure 15 ).
When the engines starts, release the key.
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 15
2. Turn the ignition key to stop to stop the engine.
19