Toro 74952, Руководство оператора

Страница: 14 / 68

Product Overview
g027333
Figure 4
1. Height-of-cut deck lift
pedal 6. Roll bar
2. Transport lock 7. Seat belt
3. Parking brake lever 8. Fuel cap
4. Controls
9. Mower deck
5. Motion-control levers 10. Caster wheel
Controls
Become familiar with all the controls before you start the
engine and operate the machine (
Figure 4 and Figure 5 ).
25
25
10
15
G008951
1
2
3
4
5
6
Figure 5
1. PTO Switch
4. Hour
meter/Safety-interlock
display/Fuel gauge
2. Choke 5. Ignition switch
3. Throttle control 6. Fuses
Fuel Gauge
The fuel gauge is located with the hour meter, and the bars
light up when the ignition switch is on (
Figure 6 ).
The indicator light appears when the fuel level is
low—approximately 3.8 L (1 US gallon) remaining in the
fuel tank.
Figure 6
1. Fuel gauge (bars) 4. Safety-interlock symbols
2. Battery light 5. Low-fuel indicator light
3. Hour meter
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance (
Figure 6 ).
Safety-Interlock Indicators
There are symbols on the hour meter and the indicate with a
black triangle that the interlock component is in the correct
position (
Figure 6 ).
Battery-Indicator Light
When the ignition key is initially turned to the Run position
for a few seconds, the battery voltage will be displayed in the
area where the hours are normally displayed.
The battery light turns on when the ignition is turned on and
when the charge is below the correct operating level (
Figure
6 ).
Throttle Control
The throttle control is variable between Fast and Slow .
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
Blade-Control Switch (PTO)
The blade-control switch (PTO) is used to engage the electric
clutch and drive the mower blades. Pull the switch up to
14